| AMI UCNTPL205-16MZ20RFCW Mounted Units & Inserts | J1:76 mm; H:190 mm; s1:42.9 mm; S:24.6 mm; e:22 mm; A:40 mm; C0:23.2 kN; T min.:-40 °C; G:M6x1; L1:94 mm; |
| AMI UCTBL207-23B Mounted Units & Inserts | Weight:2.2 kg; B:49.2 mm; d1:67.2 mm; S:24.6 mm; Designation of housing:C210-; T min.:-20 °C; G:M6x1; A3:2 mm; d:47.62 mm; C:35.1 kN; |
| AMI MUCP212NP Mounted Units & Inserts | d:15.88 mm; T min.:-20 °C; S:6 mm; Weight:0.4 kg; Z:41.3 mm; Designation of bearing:US202-10G2; A2:35 mm; Dz:46 mm; C:9.55 kN; s1:11 mm; |
| AMI BF207 Flange Block Bearings | Base to Center Height:Not Applicable; d:1.3750 in; Ring Size:Standard; Ball Material:Steel; Bearing Bore Shape:Round; Ship Weight:3.48 LB; Bearing Series:207 Series; Manufacturing Plant Location:Rogersville, TN; Expansion Type:Non-Expansion; Brand:Baldor-Dodge; |
| AMI KHLFL202-10 Flange Block Bearings | Z:47.8 mm; Weight:1.57 kg; H2:41 mm; C:14 kN; B:34 mm; Designation of open end cover:SCOU205-16; d:25.4 mm; Designation of housing:SP203-205/52N-; S:14.3 mm; Recommended tightening torque for set screw:3.7 Nm; |
| AMI UKFX08+HS2308 Flange Block Bearings | Min operating temperature, Tmin:-40 °C; Mass:10.9 kg; Da max:213 mm; Static load, C0:1,030 kN; Y1:2.55; d2:159.3 mm; da min:152 mm; b:10.5 mm; ra max:2 mm; D1:202 mm; |
| AMI MUCNTPL206-18W Take Up Unit Bearings | T min.:-40 °C; Designation of open end cover:SCOU205-15; d:23.81 mm; e:19 mm; S:14.3 mm; G:R1/8"; s1:17 mm; A2:38.7 mm; N:11,5mm; C0:7.88 kN; |
| AMI BTBL6-18CEW Pillow Block Bearings | Maximum Capacity / Filling Slot:No; Inner Race Width:0 Inch | 0 Millimete; Characteristic rolling element frequency, BSF:7.54 Hz; Outside Diameter:6.693 Inch | 170 Mil; Snap Ring:No; Category:Single Row Ball Bear; UNSPSC:31171504; Fatigue limit load, Cu:2.8 kN; Internal Special Features:No; Cage Material:Steel; |
| AMI MUCP205-16RF Pillow Block Bearings | Nlim (grease):18,000 rpm; Min operating temperature, Tmin:-60 °C; ra max:0.6 mm; d:17 mm; a min:1.9 mm; b min:1.35 mm; Characteristic rolling element frequency, BSF:3.78 Hz; rNa max:0.5 mm; Fatigue limit load, Cu:0.21 kN; rs min:0.6 mm; |
| AMI MUCST206-20NP Take Up Unit Bearings | d:17 mm; Brand:NTN; ras max:0.6 mm; B:20 mm; Mass:0.03 kg; F:24 mm; t:1.5 mm; rs min:0.6 mm; da min:21 mm; Precision class:P0; |
| AMI UEFC209-27 Flange Block Bearings | s1:21.75 mm; A1:36 mm; C0:23.2 kN; Recommended tightening torque for set screw:8 Nm; Weight:2.9 kg; S:10.9 mm; J:164 mm; B:43.5 mm; T min.:-20 °C; N:14mm; |
| AMI UCFCF207-21 Flange Block Bearings | Brand:NTN; Lubrication hole on inner ring:Oui/Yes; rs min:0.6 mm; B:21 mm; F:42 mm; Mass:0.07 kg; da min:39 mm; ras max:0.6 mm; d:35 mm; Precision class:P0; |