| AMI UKFL215+H2315 Flange Block Bearings | d:60 mm; A5:38.8 mm; N:35mm; L3:102 mm; H1:130 mm; Designation of housing:T212-; C:52.5 kN; Recommended tightening torque for set screw:22 Nm; G:M6x1; N1:32 mm; |
| AMI BPFT7-23 Flange Block Bearings | N:23mm; A2:68.7 mm; G:M6x1; e:29 mm; d:60 mm; T min.:-20 °C; H:250 mm; C:52.5 kN; B:65.1 mm; Recommended tightening torque for set screw:22 Nm; |
| AMI UCPPL208-24CB Mounted Units & Inserts | C0:32.8 kN; C:52.5 kN; T min.:-20 °C; L:138 mm; Recommended tightening torque for set screw:22 Nm; B1:77.7 mm; B:61.8 mm; S:30.9 mm; Designation of housing:FLE212-; A2:77.8 mm; |
| AMI UEFX207-22TC Mounted Units & Inserts | B:51.6 mm; Designation of housing:PH210N-; N1:25 mm; S:19 mm; H2:165 mm; L1:65 mm; C:35.1 kN; Dz:100 mm; C0:23.2 kN; Designation of bearing:UC210G2; |
| AMI UCPPL204MZ2CEW Pillow Block Bearings | T min.:-20 °C; L:192 mm; G:R1/8"; B:42.8 mm; L1:54.5 mm; N:14mm; s1:39.7 mm; H:54 mm; H2:107 mm; Weight:2.37 kg; |
| AMI UCMP207-23MZ2RF Mounted Units & Inserts | T min.:-20 °C; B:87.3 mm; Designation of bearing:EX318G2; d1:133 mm; J:315 mm; S:43.6 mm; s1:80.15 mm; C:143 kN; A:76 mm; d:90 mm; |
| AMI UCECH208-24NPMZ2 Hanger Unit Bearings | Brand:SNR; da min:128.8 mm; Fatigue limit load, Cu:51.7 kN; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; rs min:2 mm; ra max:2 mm; k:3.5 mm; Characteristic inner ring frequency, BPFI:13.85 Hz; |
| AMI UCFCS207C4HR23 Flange Block Bearings | H2:157 mm; S:10.2 mm; N:17mm; B:41.2 mm; C:31.85 kN; Weight:3.05 kg; J:146 mm; Designation of bearing:US209G2; C0:20.8 kN; Recommended tightening torque for set screw:11.5 Nm; |
| AMI BF207 Flange Block Bearings | Base to Center Height:Not Applicable; d:1.3750 in; Ring Size:Standard; Ball Material:Steel; Bearing Bore Shape:Round; Ship Weight:3.48 LB; Bearing Series:207 Series; Manufacturing Plant Location:Rogersville, TN; Expansion Type:Non-Expansion; Brand:Baldor-Dodge; |
| AMI UKFX08+HS2308 Flange Block Bearings | Min operating temperature, Tmin:-40 °C; Mass:10.9 kg; Da max:213 mm; Static load, C0:1,030 kN; Y1:2.55; d2:159.3 mm; da min:152 mm; b:10.5 mm; ra max:2 mm; D1:202 mm; |
| AMI UCP214-44 Pillow Block Bearings | D:280 mm; da:231 mm; Da:248 mm; Static Load Rating:242 kN; Dynamic Load Rating:122.9 kN; d:200 mm; Oil Holes:3 mm; B:30 mm; Radius:2 mm; |
| AMI MUCP212NP Mounted Units & Inserts | d:15.88 mm; T min.:-20 °C; S:6 mm; Weight:0.4 kg; Z:41.3 mm; Designation of bearing:US202-10G2; A2:35 mm; Dz:46 mm; C:9.55 kN; s1:11 mm; |