| AMI MUCF205-16 Flange Block Bearings | Bearing Insert Material:Nickel-Coated Steel; End Cap Groove:Yes; Self Aligning:Self Centering; Bearing Thread Type:UNC; Brand:Baldor-Dodge; Housing Coating:No Coating; Bearing Inner Ring Material:Steel; Bearing Outer Ring Material:Steel; Anti-Rotation Pin:Yes; Housing Type:Tapped Base Pillow B; |
| AMI MUCFPL207-22RFW Flange Block Bearings | C0:32.8 kN; C:52.5 kN; H2:102 mm; Designation of bearing:US212G2T04; d:60 mm; L1:119 mm; G:M6x1; Recommended tightening torque for set screw:22 Nm; T min.:-40 °C; s1:26.85 mm; |
| AMI MUCLP210-31NP Pillow Block Bearings | Designation of bearing:UC208-24G2; Designation of housing:F208N-; s1:24.6 mm; Designation of closed end cover:SCC208; C0:18.2 kN; G:M6x1; A:36 mm; N:16mm; A2:51.2 mm; e:21 mm; |
| AMI BPFT7-23 Flange Block Bearings | N:23mm; A2:68.7 mm; G:M6x1; e:29 mm; d:60 mm; T min.:-20 °C; H:250 mm; C:52.5 kN; B:65.1 mm; Recommended tightening torque for set screw:22 Nm; |
| AMI UCNTPL206W Mounted Units & Inserts | da min:50 mm; Outer Race Width:0.63 Inch | 16 Milli; Radial clearance class:CN; Bore:1.772 Inch | 45 Mill; Inch - Metric:Metric; Inner Race Width:0 Inch | 0 Millimete; Maximum Capacity / Filling Slot:No; UNSPSC:31171504; Static load, C0:15.1 kN; Weight / Kilogram:0.25; |
| AMI UCPX11 Pillow Block Bearings | D:100 mm; B:21 mm; D3 max:96.8 mm; f0:14.3; ra max:1.5 mm; Radial clearance class:CN; Fatigue limit load, Cu:1.33 kN; rNs min:0.5 mm; D4 max:106.5 mm; b min:2.7 mm; |
| AMI UCF205-14CE Flange Block Bearings | N1:25 mm; L1:70 mm; T min.:-40 °C; H1:22 mm; C0:29.2 kN; Z:26.8 mm; G:M6x1; A1:40 mm; N:20mm; B1:71.3 mm; |
| AMI MUCECH206-19NPRF Hanger Unit Bearings | f0:11.4; B:11 mm; d:10 mm; rs min:0.6 mm; Dynamic load, C:8.2 kN; Da max:31 mm; Characteristic outer ring frequency, BPF0:2.08 Hz; Nlim (grease):23,000 rpm; Min operating temperature, Tmin:-20 °C; Mass:0.05 kg; |
| AMI MUCTPL205-16RFW Take Up Unit Bearings | Brand:NTN; Y2:1.47; Nlim (grease):2,500 rpm; Category:Roller Bearings; Characteristic outer ring frequency, BPF0:8.74 Hz; d1:114.4 mm; Characteristic cage frequency, FTF:0.44 Hz; Min operating temperature, Tmin:-40 °C; Minimum Buy Quantity:N/A; Max operating temperature, Tmax:120 °C; |
| AMI UCP214-44 Pillow Block Bearings | D:280 mm; da:231 mm; Da:248 mm; Static Load Rating:242 kN; Dynamic Load Rating:122.9 kN; d:200 mm; Oil Holes:3 mm; B:30 mm; Radius:2 mm; |
| AMI UCECH206-20NPMZ2 Hanger Unit Bearings | B:132 mm; d:190 mm; Static load, C0:3,120 kN; Da max:380 mm; Characteristic cage frequency, FTF:0.42 Hz; Nref:1,100 rpm; Characteristic rolling element frequency, BSF:5.62 Hz; Radial clearance class:C4 Special; Nlim:1,600 rpm; b:20.8 mm; |
| AMI MUCPPL207-23CW Pillow Block Bearings | A1:34 mm; T min.:-20 °C; N:M16; S:22.2 mm; G:M6x1; Designation of open end cover:SCO211-55; Z:77.7 mm; H2:126 mm; H1:25 mm; T max.:100 °C; |